Bearing cup removal

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If necessary, use a pair of pliers to remove a bearing cup that fails to press out all the way.

Fig 1: Removing Bearing Cups And Flange

Courtesy of FORD MOTOR CO.

Remove the bearing cups and the flange.
1. Position the flange in the special tool.
2. Press out a bearing cup.
3. Rotate the flange 180 degrees.
4. Press on the spider to remove the remaining bearing cup.
5. Remove the flange.