Description And Operation: Driveshaft

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Whenever the vehicle is raised on a hoist, inspect the universal joint slip yoke boot for rips or holes. Install new if required.

NOTE: All driveshaft are balanced. If undercoating the vehicle, protect the driveshaft and universal joints to prevent application of any undercoating material.

Fig 1: Exploded View Of Driveshaft

Courtesy of FORD MOTOR CO.

NOTE: The constant velocity (CV) joint on the front driveshaft is not serviceable.

The driveshaft accommodates the change in length in the driveline system. The driveshaft transfers input to the rear axle. The driveshaft is composed of the universal joints (U-joints), connecting shafts and the attaching yokes.