LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 871 (Driveline System - General Information) >> Diagnostic Tests >> Driveline System >> Principals of Operation >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect for obvious signs of mechanical damage.
    VISUAL INSPECTION CHART

    Mechanical
    U-joints
    CV joints
    Driveshaft tubes
    Mounting brackets
    Flanges
    Housing and cover damage
    Differential bearings
    Differential gear sets
    Pinion bearings
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the cause is not visually evident, verify the symptom and Go to Symptom Chart .