Right side

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Stub Shaft Pilot Bearing Or Bushing Using Special Tools (205-153) & (205-345)

Courtesy of FORD MOTOR CO.

Using the special tools, install the stub shaft pilot bearing or bushing, as equipped.

Fig 2: Installing Stub Shaft Oil Seals Using Special Tools (205-350) & (205-153)

Courtesy of FORD MOTOR CO.

Using the special tools, install the stub shaft oil seals.

Fig 3: Installing Axle Shaft

Courtesy of FORD MOTOR CO.

CAUTION: Care should be taken not to damage the axle seal surface.

Install the axle shaft.