Axle and Differential Draining and Filling
WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Oil Suction Gun | 303-D104 (D94T-9000-A) |
Material
| Item | Specification |
|---|---|
| Motorcraft SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL (US); CXY-80W90-1L (Canada) |
WSP-M2C197-A |
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
- Remove the differential fill plug.
- Use the oil suction gun and remove the axle lubricant through the fill opening.
- If necessary, a cleaning solvent can be injected to remove any contaminants.
- Repeat Step 3 to remove the cleaning solvent.
- Refill the differential with lubricant.
- Install the fill plug and tighten.