LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 870 (Front Drive Axle/Differential - DANA 35) >> Diagnostic Tests >> Front Drive Axle >> Checking Differential Ring Gear Backlash

Checking Differential Ring Gear Backlash

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the differential housing cover.
  2. Using a suitable dial indicator and the special tool, measure and record the differential ring gear backlash in 4 opposing points on the ring gear.
    3. Fig 1: Measuring Differential Ring Gear Backlash Using Special Tools (100-002) & (308-021)
    G03912927Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals