LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 868 (Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear) >> In-Vehicle Servicing >> Drive Pinion Seal >> Removal

Drive Pinion Seal: Removal

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the pinion flange. For additional information, refer to Drive Pinion Flange .
    2. Fig 1: Forcing Up Rear Axle Drive Pinion Seal Metal Flange Using A Screwdriver
    GF0000835Courtesy of FORD MOTOR CO.
  2. Using a screwdriver, force the rear axle drive pinion seal metal flange up and strike it with a hammer.
    3. Fig 2: Removing Drive Pinion Oil Seal
    G03878521Courtesy of FORD MOTOR CO.
  3. Using gripping pliers and a hammer, remove the seal.
scientia non olet · About LEMON Manuals