LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 868 (Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear) >> In-Vehicle Servicing >> Differential Housing Cover >> Removal

Differential Housing Cover: Removal

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
    2. Fig 1: Identifying Differential Housing Cover And Bolts
    GF0003075Courtesy of FORD MOTOR CO.
  2. Remove the differential housing cover.
    1. Remove the 10 bolts and drain the lubricant from the differential housing.
    2. Remove the differential housing cover.
scientia non olet · About LEMON Manuals