LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 867 (Rear Drive Axle/Differential - Ford 7.5-Inch Ring Gear) >> In-Vehicle Servicing >> Differential Housing Cover >> Removal

Differential Housing Cover: Removal

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
    2. Fig 1: Locating Drain Lubricant From Axle Housing
    GF0003130Courtesy of FORD MOTOR CO.
  2. Remove the differential housing cover.
    • Remove the 10 differential housing cover bolts and drain the lubricant from the rear axle housing.
    • Remove the differential housing cover.
scientia non olet · About LEMON Manuals