LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 865 (Front Disc Brake System) >> Removal And Installation >> Front Disc Brake >> Removal >> Rear wheel drive (RWD) vehicles

Rear wheel drive (RWD) vehicles

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the hub grease cap.
  2. Remove the cotter pin.
  3. Remove the hub spindle nut retainer.
  4. Remove the hub spindle nut.
  5. Remove the outer wheel bearing retaining washer.
  6. Remove the outer wheel bearing.
  7. Remove the brake disc and hub.
    8. NOTE: The wheel hub grease seal is a one-time use part. When it is removed, a new wheel hub grease seal must be installed.
  8. Remove the wheel hub grease seal.
  9. Remove the inner wheel bearing.
scientia non olet · About LEMON Manuals