LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 824 (Seat System -- F250-F550 Super Duty) >> Disassembly And Assembly >> Seat Backrest - Rear, 60/40, CrewCab >> Disassembly And Assembly >> 40 percent seat

40 percent seat

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Use care not to damage the bushing. If damaged, install a new bushing.
  1. Using a suitable tool, carefully pry the center support from the bushing.
    • If necessary, remove the bushing.
  2. Remove the bolts and remove the RH backrest latch.
    • To install, tighten to 50 Nm (37 lb-ft).
scientia non olet · About LEMON Manuals