LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 822 (Handles, Locks, Latches And Entry Systems (F250-F550)) >> Removal And Installation >> Tailgate Lock Cylinder >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the tailgate release handle. For additional information, refer toTailgate Release Handle .
  2. Remove the clip and the tailgate lock cylinder.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals