LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 822 (Handles, Locks, Latches And Entry Systems (F250-F550)) >> Removal And Installation >> Door Lock Control Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Door Lock Control Switch
GF0005329Courtesy of FORD MOTOR CO.
    NOTE: The left front door with power windows and power mirror is shown. The other doors and vehicles without power windows or power mirrors are similar.
  1. Remove the door command center enough to gain access to the electrical connectors.
  2. Disconnect the electrical connectors.
  3. Remove the door command center.
  4. Fig 2: Switch Clips
    GF0005330Courtesy of FORD MOTOR CO.
  5. Release the front and back retaining clips on the door lock control switch and remove the switch.
  6. To install, reverse the removal procedure.