LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 798 (Climate Control - F250-F550) >> Removal And Installation >> Floor Duct >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the plenum chamber. For additional information, refer to Plenum Chamber  in this article.
  2. Remove the 3 screws and remove the heater outlet floor duct.
    Fig 1: Removing Heater Outlet Floor Duct
    GF0008107Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.