Steering Linkage - Exploded View
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Part Number | Description |
|---|---|---|
| 1 | N642569 | Cotter pins (4 required) |
| 2 | W711374 | Tie-rod end nut retainer caps |
| 3 | W711373 | Outer tie-rod end-to-wheel spindle nuts (2 required) |
| 4 | 3A131 | RH outer tie-rod end |
| 5 | - | RH adjusting sleeve clamp bolts (2 required) (part of 3281) |
| 6 | - | RH adjusting sleeve bracket bolt (part of 3281) |
| 7 | - | RH adjusting sleeve bracket nuts (part of 3281) |
| 8 | - | RH adjusting sleeve clamp nuts (2 required) (part of 3281) |
| 9 | 3281 | RH adjusting sleeve |
| 10 | 3E651 | Steering linkage damper |
| 11 | 3304 | Drag link |
| 12 | N811596 | Steering linkage damper U-bolts (2 required) |
| 13 | N620482 | Steering linkage damper U-bolt nuts (4 required) |
| 14 | 3E652 | Steering linkage damper bracket |
| 15 | N806085 | Steering linkage damper-to-bracket nuts (2 required) |
| 16 | - | Drag link-to-sector shaft arm nut retainer cap |
| 17 | - | Drag link-to-sector shaft arm nut |
| 18 | 3590 | Sector shaft arm |
| 19 | N800895 | Inner tie-rod end nut |
| 20 | 3A130 | Inner tie-rod end |
| 21 | 3281 | LH adjusting sleeve |
| 22 | - | LH adjusting sleeve clamp bolts (2 required) (part of 3281) |
| 23 | - | LH adjusting sleeve clamp nuts (2 required) (part of 3281) |
| 24 | 3304 | LH outer tie-rod end |
Fig 2: Exploded View Of Steering Linkage With Specifications (F250, F350, - Four Wheel Drive (RWD) And F450-F550)
| Item | Part Number | Description |
|---|---|---|
| 1 | N804441 | Steering linkage damper-to-bracket nut |
| 2 | 3E652 | Steering linkage damper bracket |
| 3 | 3E653 | Steering linkage damper |
| 4 | N620483 | Steering linkage damper-to-drag link nut |
| 5 | W711374 | Tie-rod end nut retainer cap |
| 6 | W711373 | LH outer tie-rod end nut |
| 7 | 3281 | LH adjusting sleeve clamp |
| 8 | - | LH adjusting sleeve clamp bolt (part of 3281) |
| 9 | N642569 | Cotter pin (2 required) |
| 10 | - | LH adjusting sleeve clamp bracket bolt (part of 3281) |
| 11 | 3B411 | LH outer tie-rod end |
| 12 | - | LH adjusting sleeve clamp bracket nut (part of 3281) |
| 13 | - | LH adjusting sleeve clamp bracket nut (part of 3281) |
| 14 | 3B410 | Outer drag link |
| 15 | - | Drag link adjusting sleeve nuts (2 required) (part of 3281) |
| 16 | - | Drag link adjusting sleeve clamp bracket bolt (part of 3281) |
| 17 | 3281 | Drag link adjusting sleeve |
| 18 | 3304 | Inner drag link |
| 19 | - | Drag link adjusting sleeve clamp bracket nut (part of 3281) |
| 20 | - | RH adjusting sleeve clamp bracket bolt (part of 3281) |
| 21 | - | RH adjusting sleeve clamp bolt (part of 3281) |
| 22 | - | Drag link adjusting sleeve clamp bolts (2 required) (part of 3281) |
| 23 | 3A131 | Outer tie-rod end |
| 24 | - | RH adjusting sleeve clamp nuts (part of 3281) |
| 25 | - | RH adjusting sleeve clamp (part of 3281) |
| 26 | - | RH adjusting sleeve clamp bracket nut (part of 3281) |
| 27 | W711373 | RH outer tie-rod/drag link nut |
| 28 | 3281 | Adjusting sleeve |
- For additional information, refer to the procedures in this article.