LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 706 (Fuel Charging And Controls - 5.4L (3V) - F-150 & Mark LT) >> Removal And Installation >> Fuel Rail and Fuel Injector - Exploded View

Fuel Rail and Fuel Injector - Exploded View

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Fuel Rail And Fuel Injector With Specifications
GF0002847Courtesy of FORD MOTOR CO.
Item Part Number Description
1 14A464 Fuel rail pressure and temperature sensor electrical connector
2 9E498 Fuel rail pressure and temperature sensor vacuum connector
3 14A464 Fuel injector electrical connector (8 required)
4 9J274 Fuel tube spring lock coupling
5 N804394 Fuel rail bolt (4 required)
6 9F792 Fuel rail
7 9F593 Fuel injector (8 required)
8 - Fuel injector to intake manifold O-ring seal (8 required)
9 - Fuel injector to fuel rail O-ring seal (8 required)
10 N808874 Fuel rail pressure and temperature sensor bolt (2 required)
11 9F972 Fuel rail pressure and temperature sensor
  1. For additional information, refer to the procedures in this information.