LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 696 (Engine - 4.6L (2V) - F-150) >> In-Vehicle Servicing >> Hydraulic Lash Adjuster >> Installation

Hydraulic Lash Adjuster: Installation

WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Lubricate the hydraulic lash adjusters with clean engine oil prior to installation.
  1. Install the hydraulic lash adjusters in their original locations.
    2. Fig 1: Locating Hydraulic Lash Adjusters
    GF0002630Courtesy of FORD MOTOR CO.
  2. Install the camshaft roller followers. For additional information, refer to Camshaft Roller Follower  in this article.
scientia non olet · About LEMON Manuals