LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 681 (Engine Controls - Pinpoint Tests - Diesel 6.0L (99P E-Series & 99P F450/550)) >> PINPOINT TEST H: Barometric Pressure (BARO) Sensor >> Introduction

PINPOINT TEST H: Barometric Pressure (BARO) Sensor: Introduction

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Ford RV Cutaway, 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

This pinpoint test is intended to diagnose the following:

Fig 1: Barometric Pressure (BARO) Sensor Connector
GF0001549
Pin Circuit
3 BARO (Barometric Pressure)
1 SIGRTN (Signal Return)
2 VREF (Reference Voltage)
Fig 2: Powertrain Control Module Connector Terminals
GF0001647
Pin Circuit
B20, B33, E25 SIGRTN (Signal Return)
B38 BARO (Barometric Pressure)
NOTE: Compare the BARO sensor value with the local barometric values.
Fig 3: Barometric Pressure (BARO) Sensor Output Chart
GF0001661