LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 681 (Engine Controls - Pinpoint Tests - Diesel 6.0L (99P E-Series & 99P F450/550)) >> PINPOINT TEST D: Crankshaft Position (CKP) Sensor >> Introduction

PINPOINT TEST D: Crankshaft Position (CKP) Sensor: Introduction

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Ford RV Cutaway, 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

This pinpoint test is intended to diagnose the following:

Fig 1: Crankshaft Position (CKP) Sensor Connector
GF0001560
Pin Circuit
2 CKP- (Crankshaft Position Sensor Negative)
1 CKP+ (Crankshaft Position Sensor Positive)
Fig 2: Fuel Injector Control Module-C (FICM-C) Connector
GF0001657
Pin Circuit
5 CKPO (Crankshaft Position Output)
Fig 3: Powertrain Control Module Connector Terminals
GF0001647
Pin Circuit
E19 CKPO (Crankshaft Position Output)
E42 GND (Ground)
E41 CKP- (Crankshaft Position Sensor Negative)
E30 CKP+ (Crankshaft Position Sensor Positive)