PINPOINT TEST C: Clutch Pedal Position (CPP) Switch: Introduction
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Ford RV Cutaway, 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
This pinpoint test is intended to diagnose the following:
- Damaged CPP top of travel switch
- Damaged CPP top of travel switch
- CPP harness circuits: CPP top of travel, CPP bottom of travel, VPWR and GND
- powertrain control module (PCM) (12A650)
| Pin | Circuit |
|---|---|
| 4 | CPP-TT (Clutch Pedal Position - Top of Travel) |
| 3 | VPWR (Vehicle Power) |
| 6 | GND (Ground) |
| 5 | CPP-BT (Clutch Pedal Position - Bottom of Travel) |
| Pin | Circuit |
|---|---|
| B36 | CPP-TT (Clutch Pedal Position - Top of Travel) |
| B27 | CPP-BT (Clutch Pedal Position - Bottom of Travel) |