Seal - Output Oil: Notes
WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS SPECIFICATIONS
| Installer, Output Shaft Oil Seal (4x4) 308-383 | |
| Installer, Output Shaft Oil Seal (4x2) 308-382 | |
| Holding Fixture, Drive Pinion Flange 205-126 (T78P-4851-A) | |
| Socket, Mainshaft Locknut (36 mm) 308-127 (T87T-7025-AH) | |
| Remover, Input Shaft Oil Seal 308-375 | |
| Slide Hammer 100-001 (T50T-100-A) |
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Gasket and Trim Adhesive F3AZ-19B508-AA | - |
| Threadlock 262 E2FZ-19554-B | WSK-M2G351-A6 |