LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 658 (Automatic Transaxle/Transmission - FNR5) >> Disassembly And Assembly Of Subassemblies >> Torque Converter Hub Seal >> Disassembly

Torque Converter Hub Seal: Disassembly

WARNING: This page is about a different car, the 2006 Mercury Milan and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transaxle. For additional information, refer to TRANSAXLE .
  2. Remove the torque converter.
    Fig 1: Locating Torque Converter
    G04681900Courtesy of FORD MOTOR CO.
  3. Using the special tools, remove the torque converter hub seal.
    Fig 2: Identifying Special Tools
    G04681901Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals