LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 575 (Automatic Transmission Cooling) >> Diagnosis And Testing >> Transaxle Cooling >> Symptom Table >> Fluid Level Check (6-Speed) >> Fluid Condition Check (6-Speed)

Fluid Condition Check (6-Speed)

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the fluid level.
  2. Observe the color and the odor. The color under normal circumstances should be a dark red color, not brown or black or have a burnt odor.
  3. Hold the fluid level indicator over a white facial tissue and allow the fluid to drip onto the facial tissue and examine the stain.
  4. If evidence of solid material is found, the transmission fluid pan should be removed for further inspection.
  5. If the stain is a foamy pink color, this may indicate coolant in the transaxle. The engine cooling system should also be inspected at this time.
  6. If fluid contamination or transaxle failure is confirmed by the sediment in the bottom of the fluid pan, install a new transaxle. If installing a new transaxle, the cooler bypass valve and cooler tubes should be cleaned.
  7. If the transaxle is to be overhauled or if installing a new transaxle, install a new transmission fluid cooler. For additional information, refer to TRANSMISSION FLUID COOLER .
scientia non olet · About LEMON Manuals