LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 552 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Luggage Compartment Lid Latch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the luggage compartment lid trim cover.
  2. Disconnect the luggage compartment lid latch electrical connector.
    Fig 1: Identifying Luggage Compartment Lid Latch Electrical Connector
    G04659070Courtesy of FORD MOTOR CO.
  3. Remove the 3 nuts and the luggage compartment lid latch.
    • To install, tighten to 12 N.m (9 lb-ft).
  4. To install, reverse the removal procedure.