LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 552 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Ignition Lock Cylinder >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery. For additional information, refer to BATTERY DISCONNECT .
  2. Remove the 3 lower steering column shroud screws.
  3. Remove the lower steering column shroud.
  4. Insert the ignition key and turn it to the ACC position.
  5. Using a suitable tool, press the release pin and remove the ignition cylinder.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals