LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 544 (Transfer Case - Power Transfer Unit (PTU)) >> In-Vehicle Repair >> Halfshaft Seal - RH >> Installation

Halfshaft Seal - RH: Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Make sure the halfshaft seal, the halfshaft seal bore and the halfshaft are clean and dry. Do not oil the halfshaft seal or leakage will occur.
    NOTE: Always install a new halfshaft seal.
    Fig 1: Identifying Special Tool (205-815)
    G04657656Courtesy of FORD MOTOR CO.
  1. Using the special tool, install a new halfshaft seal.
  2. Install the RH halfshaft. For additional information, refer to INSTALLATION .
scientia non olet · About LEMON Manuals