LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Information System & Entertainment System) >> Removal And Installation >> Audio Unit >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: It is not necessary to remove the audio unit to retrieve the part number. For additional information, refer to AUDIO UNIT PART NUMBER RETRIEVAL .
  1. Remove the instrument cluster finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Remove the 4 screws and the audio unit.
    • Disconnect the electrical connector and the antenna lead-in cable.
  3. To install, reverse the removal procedure.