Engine Coolant Temperature (ECT) Sensor: Removal
WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to the OFF position.
- Drain the engine cooling system. For additional information refer to ENGINE COOLING .
- Disconnect the cooling fan electrical connector.
- Disconnect the engine coolant temperature (ECT) electrical connector.
- Remove the ECT sensor and discard the O-ring seal.
CAUTION:
Make sure the ignition switch is in the OFF position prior to working on the electronic engine controls.