Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Brake Shift Interlock Actuator Remove/Install Components

Courtesy of FORD MOTOR CO.

Remove the steering column assembly. For additional information, refer to STEERING COLUMN .
Remove the insert plate and shift lock actuator.

Fig 2: Locating Shift Lock Actuator Bolts
Courtesy of FORD MOTOR CO.

NOTE: The shift lock actuator clip is an assembly aid for the assembly plant and does not need to be replaced in the field.

Remove the insert plate from the shift lock actuator.
- Remove and discard the shift lock actuator clip.
  
  Fig 3: Locating Shift Lock Actuator Clip
  Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.
- Tighten to 9 Nm (80 lb-in).
  
  Fig 4: Locating Shift Lock Actuator Bolts
  Courtesy of FORD MOTOR CO.