Disassembly And Assembly Of Subassemblies: Countershaft: Assembly

WARNING: This page is about a different car, the 2006 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Remove the bearing from the Gear/Bearing Heater, then install the countershaft bearing.
- If necessary, use the Thrust Washer Bearing Race Driver to seat the bearing.
  
  Fig 1: Installing Countershaft Bearing
  Courtesy of FORD MOTOR CO.
Remove the bearing from the Gear/Bearing Heater, then install the rear countershaft bearing.
- If necessary, use the Thrust Washer Bearing Race Driver to seat the bearing.
  
  Fig 2: Locating Rear Countershaft Bearing
  Courtesy of FORD MOTOR CO.