Output State Control (OSC) Mode: Procedure: Notes

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The OSC has 2 modes of operation for the transmission:

Service Bay Mode
Drive Mode

In order to operate the OSC in the drive mode, no diagnostic trouble codes (DTCs) related to the transmission range (TR) sensor, turbine shaft speed (TSS) sensor, output shaft speed (OSS) sensor or the SSPC-A (coast clutch), SSPC-B (overdrive clutch), SSPC-C (intermediate clutch), SSPC-D (direct clutch), SSPC-E (low reverse) and PC-A (line pressure) solenoids may be present. Carry out the KOEO on-demand self test and retrieve continuous codes to identify any codes that are present.