Cylinder Bore Taper
WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the cylinder bore at the top, middle and bottom of piston ring travel in 2 directions as indicated. Verify the cylinder bore is within the wear limit. The difference indicates the cylinder bore taper. Bore the cylinder to the next oversize limit.
- Refer to ENGINE - 5.4L (3V) -- F250-F550 SUPER DUTY PICKUPS , ENGINE - 6.0L DIESEL -- F250-F550 SUPER DUTY PICKUPS or ENGINE - 6.8L (3V) -- F250-F550 SUPER DUTY PICKUPS for appropriate procedure.