LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 452 (HVAC Control System - F250-F550 Super Duty) >> Removal And Installation >> Climate Control Assembly >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
    2. NOTE: Manual climate controls shown, EATC similar.
    Fig 1: Locating Climate Control Screws
    G04645150Courtesy of FORD MOTOR CO.
  2. Remove the screws and the climate control assembly.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals