LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 422 (Parking Aid System) >> Removal And Installation >> Parking Aid Module >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the RH rear quarter trim panel.
  2. Disconnect the electrical connectors.
  3. Remove the 2 screws and the parking aid module.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals