LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 395 (Warning System) >> General Procedures >> Safety Belt Minder Deactivating/Activating >> Preparation

Safety Belt Minder Deactivating/Activating: Preparation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the parking brake before deactivating/activating the belt minder.
  2. Place the gear selector lever in PARK or NEUTRAL (manual transaxle).
  3. Place the ignition switch in the OFF position.
  4. Close all the vehicle doors.
  5. Unbuckle the driver safety belt.
  6. Place the parking lamps/headlamps switch in the OFF position.
scientia non olet · About LEMON Manuals