Manual Transaxle and Clutch

WARNING: This page is about a different car, the 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The clutch system includes:

flywheel
clutch disc
clutch pressure plate
clutch master cylinder
clutch slave cylinder
hydraulic line
clutch pedal

The clutch system transmits fluid pressure to the slave cylinder, which in turn moves the clutch diaphragm spring.

The clutch master cylinder uses brake fluid and shares a common reservoir with the brake master cylinder.

The clutch is a single plate, dry-friction disc with a diaphragm-style spring clutch pressure plate. The clutch disc has a hub which is splined to the input shaft. The clutch disc has friction material where it contacts the flywheel and the clutch pressure plate. Torsion springs on the flywheel help absorb the engine torque pulses. The clutch pressure plate applies pressure to the clutch disc, holding it tightly against the surface of the flywheel.

In the engaged position, the diaphragm spring holds the clutch pressure plate against the clutch disc, so that engine torque is transmitted to the input shaft.