Transmission Range (TR) Sensor: Removal

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Transmission Range (TR) Sensor Replacement Components With Torque Specifications

Courtesy of FORD MOTOR CO.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
Remove the battery and tray. For additional information, refer to REMOVAL AND INSTALLATION .
Remove the transmission range (TR) sensor.
1. Disconnect the TR sensor electrical connector.
2. Remove the TR sensor retaining bolts.
3. Remove the TR sensor.
  
  Fig 2: Identifying Transmission Range (TR) Sensor Components
  Courtesy of FORD MOTOR CO.