LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 348 (HVAC Control System) >> Removal And Installation >> Air Conditioning (A/C) Cycling Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the A/C cycling switch electrical connector.
  2. Remove the A/C cycling switch.
    • Discard the O-ring seal.
    • To install, tighten to 3 N.m (27 lb-in).
  3. To install, reverse the removal procedure.
    • Install a new O-ring seal.
scientia non olet · About LEMON Manuals