Cylinder Head: Assembly
WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
Using the special tool, install the valve stem seal.
 Courtesy of FORD MOTOR COMPANY
|
- 3.
Using the special tool, install the valve spring, retainer and key.
 Courtesy of FORD MOTOR COMPANY
|
- 4.
Install the hydraulic lash adjusters.
- Lubricate the hydraulic lash adjusters with clean engine oil.