Transfer Case

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The New Venture Gear transfer cases are either manual or electric shift. These transfer cases are specifically designed to withstand high engine torque loads under all modes of operation.

When in the 4x4 mode of operation, torque is transferred from the main input shaft through a high load capacity chain link belt to the transfer case front output shaft. The front output driveshaft then transfers this torque to the front differential.

Fig 1: Exploded View Of Electric Shift Transfer Case

Courtesy of FORD MOTOR CO.

Fig 2: Electric Shift Transfer Case Parts Description Chart

Courtesy of FORD MOTOR CO.

Fig 3: Exploded View Of Mechanical Shift Transfer Case

Courtesy of FORD MOTOR CO.

Fig 4: Mechanical Shift Transfer Case Parts Description Chart

Courtesy of FORD MOTOR CO.