DTC P0103: Mass Or Volume Air Flow A Circuit High Input
WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P0103 - MASS OR VOLUME AIR FLOW A CIRCUIT HIGH INPUT
| Description: | The mass air flow (MAF) sensor circuit is monitored by the PCM for high air flow (or voltage) input through the comprehensive component monitor (CCM). If during KOEO, or KOER, the air flow (or voltage) changes above a maximum calibrated limit, the test fails. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | A MAF V PID (MAF PID) reading greater than 4.6 volts during KOER indicates a hard fault. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DC . | ||