LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2206 (Engine Controls - Pinpoint Test A: No Start Through Pinpoint Test DK: Accelerator Pedal Position (App) Sensor - (Except Diesel & Hybrid)) >> PINPOINT TEST DA: Intake Air Temperature (IAT) Sensor >> Introduction

PINPOINT TEST DA: Intake Air Temperature (IAT) Sensor: Introduction

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.

This pinpoint test is intended to diagnose the following:

Powertrain Control Module (PCM) Connector 

For PCM connector views or reference values, refer to REFERENCE VALUES .

POWERTRAIN CONTROL MODULE CONNECTOR PINS REFERENCE CHART

Vehicle Connector Pin Circuit
Crown Victoria, E-Series 6.8L, Grand Marquis, Ranger, Town Car 170 PIN E26
E22
MAF RTN
IAT
F-150 6.2L, F-150 5.0L 190-PIN B2
B47
MAF RTN
IAT
F-150 3.5L 198 PIN B9
B75
SIGRTN
IAT
F-Series Super Duty,
Mustang 5.4L, Mustang 5.0L
190-PIN B2
B47
SIGRTN
IAT
Fiesta 128 PIN E1
E26
MAF RTN
IAT
Flex 4V 3.5L, MKS 3.7L, MKT 3.7L, Taurus 4V 3.5L 190-PIN B42
B43
MAF RTN
IAT
Flex GTDI 3.5L, MKS 3.5L, MKT 3.5L, Taurus GTDI 3.5L 190-PIN B47 IAT
Fusion 3.5L, MKZ 140 PIN B42
B43
MAF RTN
IAT
Mustang 3.7L 190-PIN B41
B47
SIGRTN
IAT
All other vehicles 190-PIN B41
B47
MAF RTN
IAT