Driver and Passenger Power Seats Without Memory

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The 10-way power seat control feature moves the seat in 10 possible directions: the seat can be moved forward or backward and the front and back of the cushion can be moved up and down independently. The backrest of the seat can be moved forward and backward, and the lumbar can be moved in and out. All 10 positions are controlled by one switch. The power seat feature operates independent of the ignition position.

The 8-way power seat control feature moves the seat in 8 possible directions. It is like the 10-way power seat, less power lumbar.

The 4-way power seat control feature moves the seat in 4 possible directions: the seat can be moved forward or backward and the backrest of the seat can be moved forward and backward.

The power seat motors are hardwired to the seat control switch. The circuits are normally at ground through the seat control switch. An individual circuit is switched to voltage when a specific adjustment position is selected.