Removal and Installation
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Make sure the key is in the OFF position.
- Remove the 4 pushpins and the RH luggage compartment trim panel.
- Disconnect the subwoofer amplifier electrical connectors.
- Remove the 3 screws and the subwoofer amplifier.
- To install, tighten to 5 Nm (44 lb-in).
- To install, reverse the removal procedure.