LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2104 (Electronic Engine Controls - 2.5L (Except Hybrid)) >> Removal And Installation >> Camshaft Position (CMP) Sensor >> Material Specifications

Material Specifications

WARNING: This page is about a different car, the 2011 Mercury Milan and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS TABLE

Item Specification
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada)
XO-5W20-QSP (US); CXO-5W20-LSP12 (Canada)
WSS-M2C945-A
Fig 1: Camshaft Position (CMP) Sensor Replacement Components With Torque Specifications
G07785764Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION

Item Part Number Description
1 14A464 Camshaft Position (CMP) sensor electrical connector (part of 12B637)
2 W701219 CMP sensor bolt
3 12K073 CMP
4 - CMP O-ring seal