Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Fusion shown in the illustration, Milan and MKZ similar.

Open the overhead console compartment door.

Fig 1: Locating Overhead Console Compartment Door
Courtesy of FORD MOTOR CO.
From inside the compartment, remove the 2 screws.
Remove the overhead console.
- Disconnect the electrical connectors.
To install, reverse the removal procedure.