LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2057 (Automatic Transaxle - AISIN Aw21) >> Disassembly And Assembly Of Subassemblies >> Torque Converter Hub Seal >> Assembly

Torque Converter Hub Seal: Assembly

WARNING: This page is about a different car, the 2011 Lincoln MKZ and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the torque converter hub seal in place.
    Fig 1: Positioning Torque Converter Hub Seal In Place
    G07786087Courtesy of FORD MOTOR CO.
  2. Using the Fluid Pump Seal Installer, install the torque converter hub seal.
    Fig 2: Installing Torque Converter Hub Seal Using The Fluid Pump Seal Installer
    G07786088Courtesy of FORD MOTOR CO.
  3. Install the torque converter.
    Fig 3: Locating Torque Converter
    G07786089Courtesy of FORD MOTOR CO.
  4. Install the transaxle. For additional information, refer to TRANSAXLE  in this service information.
scientia non olet · About LEMON Manuals