Crankshaft Pulley: Removal

WARNING: This page is about a different car, the 2011 Lincoln MKZ and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING article.
Remove the accessory drive belt and the power steering belt. For additional information, refer to ACCESSORY DRIVE - 3.5L -- FUSION & MKZ article.
Using the Strap Wrench, remove the crankshaft pulley bolt and washer.
- Discard the bolt.
Fig 1: Identifying Crankshaft Pulley Bolt And Washer With Strap Wrench
Courtesy of FORD MOTOR CO.
Using the 3 Jaw Puller, remove the crankshaft pulley.

Fig 2: Removing Crankshaft Pulley Using Jaw Puller

Courtesy of FORD MOTOR CO.