Engine Fluid Temperature Management
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.
The engine fluid temperature management can be activated when high temperature or high load conditions take place. When the engine fluid temperature management is activated, the PCM sends a controller area network (CAN) message to the instrument cluster (IC) or instrument panel cluster (IPC). The IC (IPC) then displays a power reduced to lower temp message. The engine coolant temperature gauge needle moves toward the H (hot) zone. In order to manage the engine's fluid temperatures, the PCM starts to reduce engine power and vehicle speed. The air conditioning may cycle ON and OFF to protect overheating of the engine.