LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2050 (Engine Controls - Description And Operation (Except Diesel & Hybrid)) >> (Torque Based) Electronic Throttle Control (ETC) >> APP and TP Sensor Inputs

APP and TP Sensor Inputs

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.

Accelerator Pedal Position (APP) Sensor Check: 

ACCELERATOR PEDAL POSITION (APP) SENSOR REFERENCE CHART

DTCs (1)  
P1575 (ETC system with a 2 track APP sensor) APP sensor out of self-test range
P2122, P2123, P2127, P2128, P2132, P2133 APP sensor circuit continuity test (powertrain malfunction indicator [wrench], non-MIL)
P2121, P2126, P2131 (ETC system with a 3 track APP sensor) APP range/performance (powertrain malfunction indicator [wrench], non-MIL)
P2138 (ETC system with a 2 track APP sensor) APP to APP signal correlation (powertrain malfunction indicator [wrench], non-MIL)
(1) Correlation and range/performance - sensor disagreement between processors internal to the PCM. Monitor execution is continuous. Monitor false detection duration is less than 1 second to register a concern. Refer to DIAGNOSTIC TROUBLE CODE (DTC) CHARTS AND DESCRIPTIONS for additional DTC information.

Throttle Position (TP) Sensor Check: 

THROTTLE POSITION (TP) SENSOR REFERENCE CHART

DTCs (1)  
P0122, P0123, P0222, P0223 TP circuit continuity test (MIL, powertrain malfunction indicator [wrench])
P0121, P0221 (ETC system with a 3 track APP sensor) TP range/performance (non-MIL)
P1124 (ETC system with a 2 track APP sensor) TP sensor out of self-test range
P2135 TP to TP sensor correlation test (powertrain malfunction indicator [wrench], non-MIL)
(1) Correlation and range/performance - sensor disagreement between processors internal to the PCM, TP inconsistent with requested throttle plate position. Monitor execution is continuous. Monitor false detection duration is less than 1 second to register a concern. Refer to DIAGNOSTIC TROUBLE CODE (DTC) CHARTS AND DESCRIPTIONS for additional DTC information.